Custom Elysian Tauros Assault Vehicle
Moderator: Moderators
- Dakkar98 ( 688 )
- Bartertown Watchman
- Posts: 614
- Joined: Tue Mar 08, 2005 12:06 am
- Location: Middletown, MD U.S.A.
Custom Elysian Tauros Assault Vehicle
Hey B-town!
Ever since I saw the Elysian Tauros Assault Vehicle at Forge World I have been wanting to build custom ones.
I want to turn these: Into these: More pictures can be found here: http://www.forgeworld.co.uk/New_Stuff/E ... HICLE.html
I am going to attempt to scratch build something very similar starting with an attack bike and crafting components out of plasticard and brass rod.
I would like to get some measurments and pictures of the components of this model prior to assembly so I can attempt to emulate some of the detail.
Ideally, if someone is planning on purchasing one, they could call in their order to GW store near me, giving them my information as the person picking it up.
I take my measurements and pictures and then, within a day or two, I pay to ship the model to you.
The buyer gets free shipping, I get measurements and pictures.
Any thoughts?
Any takers?
Thanks,
Dakkar
Ever since I saw the Elysian Tauros Assault Vehicle at Forge World I have been wanting to build custom ones.
I want to turn these: Into these: More pictures can be found here: http://www.forgeworld.co.uk/New_Stuff/E ... HICLE.html
I am going to attempt to scratch build something very similar starting with an attack bike and crafting components out of plasticard and brass rod.
I would like to get some measurments and pictures of the components of this model prior to assembly so I can attempt to emulate some of the detail.
Ideally, if someone is planning on purchasing one, they could call in their order to GW store near me, giving them my information as the person picking it up.
I take my measurements and pictures and then, within a day or two, I pay to ship the model to you.
The buyer gets free shipping, I get measurements and pictures.
Any thoughts?
Any takers?
Thanks,
Dakkar
You do not have the required permissions to view the files attached to this post.
Bits for my marines: Need/Have
Studded Shoulder Pads: 900+/290+
Mk6 Helmeted Heads: 800+/600+
It's Bartertown, if you don't like my offer, please haggle with me.
References Owed (to me and by me): TheKiiier, CraftworldsRus, morgazmo84015, Beesterdo, 2.0, chosenoftzeentch, kepora, tiger, beowulfdahunter, getupandgo, thibner, snikrot, Crovan.
Studded Shoulder Pads: 900+/290+
Mk6 Helmeted Heads: 800+/600+
It's Bartertown, if you don't like my offer, please haggle with me.
References Owed (to me and by me): TheKiiier, CraftworldsRus, morgazmo84015, Beesterdo, 2.0, chosenoftzeentch, kepora, tiger, beowulfdahunter, getupandgo, thibner, snikrot, Crovan.
- iPAINTminis ( 152 )
- Journeyman Trader
- Posts: 214
- Joined: Thu Apr 22, 2004 6:13 pm
- Location: San Antonio, TX (yeah I moved)
- Contact:
Re: Custom Elysian Tauros Assault Vehicle
Awesome conversion idea! Good luck with the conversion, thought of something similar a while back. You may have just inspired me to actually take vehicles in my army. 
Brian Collazo
iPAINTminis
BJCMiniStudio - BJCMiniStudio.blogspot.com
Duct-taping a Flamer to your Boltgun does not count as a Combi-weapon, and painting it pretty won't make it "Master Crafted"
Trade References Missing: ChaosOrc
iPAINTminis
BJCMiniStudio - BJCMiniStudio.blogspot.com
Duct-taping a Flamer to your Boltgun does not count as a Combi-weapon, and painting it pretty won't make it "Master Crafted"
Trade References Missing: ChaosOrc
-
MagickalMemories ( 832 )
- Lord Logorrheic!
- Posts: 16741
- Joined: Thu Sep 04, 2003 11:38 pm
- Location: St. Louis, MO - USA
Re: Custom Elysian Tauros Assault Vehicle
I don't know. Looks like a scam to me.
"Hey, everyone! Buy some Forgeworld stuff and have it sent to me! I'll send it back to you! Promise!"
How do we know we can trust you? You seem a little dodgy.
"Hey, everyone! Buy some Forgeworld stuff and have it sent to me! I'll send it back to you! Promise!"
How do we know we can trust you? You seem a little dodgy.
Lower rating? You ship first.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
- Dakkar98 ( 688 )
- Bartertown Watchman
- Posts: 614
- Joined: Tue Mar 08, 2005 12:06 am
- Location: Middletown, MD U.S.A.
Re: Custom Elysian Tauros Assault Vehicle
Eric,
Real constructive. Isn't that threadjacking?
Real constructive. Isn't that threadjacking?
Bits for my marines: Need/Have
Studded Shoulder Pads: 900+/290+
Mk6 Helmeted Heads: 800+/600+
It's Bartertown, if you don't like my offer, please haggle with me.
References Owed (to me and by me): TheKiiier, CraftworldsRus, morgazmo84015, Beesterdo, 2.0, chosenoftzeentch, kepora, tiger, beowulfdahunter, getupandgo, thibner, snikrot, Crovan.
Studded Shoulder Pads: 900+/290+
Mk6 Helmeted Heads: 800+/600+
It's Bartertown, if you don't like my offer, please haggle with me.
References Owed (to me and by me): TheKiiier, CraftworldsRus, morgazmo84015, Beesterdo, 2.0, chosenoftzeentch, kepora, tiger, beowulfdahunter, getupandgo, thibner, snikrot, Crovan.
-
MagickalMemories ( 832 )
- Lord Logorrheic!
- Posts: 16741
- Joined: Thu Sep 04, 2003 11:38 pm
- Location: St. Louis, MO - USA
Re: Custom Elysian Tauros Assault Vehicle
Rule #16 affords me the ability to do whatever I want.
; )
On a serious note:
My previous post was a joke. Nobody reading that should take it seriously.
In fact, MUCH of what I say should not be taken seriously.
Honestly, though... Although my post was not written in anything resembling a serious manner, it DOES give us the opportunity to address the issue:
Folks, Dakkar98 (for those of you who don't know) is a staff member (red or gree user ID's indicate staff status). In fact, I think he might have been one longer than me!
While this is no guarantee of safety, that -combined with his stellar references- is about the closest thing you can get to a guarantee on here.
Even when he's pimping himself for *certain bits*, he's a good guy. : )
Eric
; )
On a serious note:
My previous post was a joke. Nobody reading that should take it seriously.
In fact, MUCH of what I say should not be taken seriously.
Honestly, though... Although my post was not written in anything resembling a serious manner, it DOES give us the opportunity to address the issue:
Folks, Dakkar98 (for those of you who don't know) is a staff member (red or gree user ID's indicate staff status). In fact, I think he might have been one longer than me!
While this is no guarantee of safety, that -combined with his stellar references- is about the closest thing you can get to a guarantee on here.
Even when he's pimping himself for *certain bits*, he's a good guy. : )
Eric
Lower rating? You ship first.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
Give me a sense of humor Lord. Give me the grace to see a joke.
To get some humor out of life and pass it on to other folk.
I think what this situation needs is some imagination.
"...I'm a nerd, and I'm here tonight to stand up for the rights of other nerds.” – Gilbert Lowell
Want my help with a BTR or backout? All messages sent/posted should be in CHRONOLOGICAL order. Otherwise, I just won't read it.
- Dakkar98 ( 688 )
- Bartertown Watchman
- Posts: 614
- Joined: Tue Mar 08, 2005 12:06 am
- Location: Middletown, MD U.S.A.
Re: Custom Elysian Tauros Assault Vehicle
Does anyone have one of these vehicles that could take some pics and measurements for me?
Is anyone even reading past the 3rd post?
Come on I am looking to build at least 10 of these. 4 to include with bike squadrons plus 6 for 2 attack bike squadrons.
Thanks,
Dakkar
Is anyone even reading past the 3rd post?
Come on I am looking to build at least 10 of these. 4 to include with bike squadrons plus 6 for 2 attack bike squadrons.
Thanks,
Dakkar
Bits for my marines: Need/Have
Studded Shoulder Pads: 900+/290+
Mk6 Helmeted Heads: 800+/600+
It's Bartertown, if you don't like my offer, please haggle with me.
References Owed (to me and by me): TheKiiier, CraftworldsRus, morgazmo84015, Beesterdo, 2.0, chosenoftzeentch, kepora, tiger, beowulfdahunter, getupandgo, thibner, snikrot, Crovan.
Studded Shoulder Pads: 900+/290+
Mk6 Helmeted Heads: 800+/600+
It's Bartertown, if you don't like my offer, please haggle with me.
References Owed (to me and by me): TheKiiier, CraftworldsRus, morgazmo84015, Beesterdo, 2.0, chosenoftzeentch, kepora, tiger, beowulfdahunter, getupandgo, thibner, snikrot, Crovan.
Re: Custom Elysian Tauros Assault Vehicle
I have read past the 3rp post.
Forgeworld prices are in GPB and not Euro right?
I rellay like the model and would see it fit an ork warbuggy pretty good. I can see why you want to convert some.
JF
Forgeworld prices are in GPB and not Euro right?
I rellay like the model and would see it fit an ork warbuggy pretty good. I can see why you want to convert some.
JF
- Dakkar98 ( 688 )
- Bartertown Watchman
- Posts: 614
- Joined: Tue Mar 08, 2005 12:06 am
- Location: Middletown, MD U.S.A.
Re: Custom Elysian Tauros Assault Vehicle
Correct. That puts them at about $43.5 US at today's exchange rate.Brala wrote:Forgeworld prices are in GPB and not Euro right?
Bits for my marines: Need/Have
Studded Shoulder Pads: 900+/290+
Mk6 Helmeted Heads: 800+/600+
It's Bartertown, if you don't like my offer, please haggle with me.
References Owed (to me and by me): TheKiiier, CraftworldsRus, morgazmo84015, Beesterdo, 2.0, chosenoftzeentch, kepora, tiger, beowulfdahunter, getupandgo, thibner, snikrot, Crovan.
Studded Shoulder Pads: 900+/290+
Mk6 Helmeted Heads: 800+/600+
It's Bartertown, if you don't like my offer, please haggle with me.
References Owed (to me and by me): TheKiiier, CraftworldsRus, morgazmo84015, Beesterdo, 2.0, chosenoftzeentch, kepora, tiger, beowulfdahunter, getupandgo, thibner, snikrot, Crovan.
Re: Custom Elysian Tauros Assault Vehicle
While I do not have a tauros to measure from.
Those look alot(cough,cough ip hack,,,,,aliens=nids,,,,tauros=warthog),,,,a warthog from halo,something like this might help,think they have them at toys r us.
http://www.google.com/imgres?imgurl=htt ... s%3Disch:1
Those look alot(cough,cough ip hack,,,,,aliens=nids,,,,tauros=warthog),,,,a warthog from halo,something like this might help,think they have them at toys r us.
http://www.google.com/imgres?imgurl=htt ... s%3Disch:1
"Ave, Imperator, morituri te salutant"
Black Templar-24,000+
Imperial Guard
Gaunts Ghost -2,000
Victoria's Own 33rd of Foot-2,000
Sisters of battle-2,500
Loyal Chaos Marines-2,000
Legio I Italica-8.000
Bretonnians 3,000plus
Black Templar-24,000+
Imperial Guard
Gaunts Ghost -2,000
Victoria's Own 33rd of Foot-2,000
Sisters of battle-2,500
Loyal Chaos Marines-2,000
Legio I Italica-8.000
Bretonnians 3,000plus